STEP 18 - MOUNTING THE DOOR HANDLES
For this Step you will need:
- SUPPLIED HANDLES (OR HANDLES OF YOUR CHOICE)
- MEASURING TAPE
- MASKING TAPE
- DRILL
- SCREW DRIVER
- PREVIOUSLY ASSEMBLY CABINETRY
The placement of the door handles is very much a personal preference however we will show you our preferred position. Place a piece of masking tape roughly in the position of where the HANDLES will be attached as shown below. This will allow you to mark the hole centres on the tape without marking the CUPBOARD DOOR. Drill the hole centres and attach the handles to the doors.